Homes
Water control that fits your everyday.
Keep an eye on your household tank and manage its filling pump from the WaterGauge app. A connected setup brings level readings, alerts and compatible pump controls into one place.
HomesTank readings, linked pump controls
and available usage reports.
A smarter way to manage
your water storage.
Practical visibility and controls for homes.
Know what’s in the tank
Check the level percentage and last reading before deciding when to fill.
Less manual checking
Review your tank from the app instead of repeatedly checking the roof.
Control the filling pump
Use Manual mode or configured Auto levels with an installed Pump Controller.
Understand daily use
Review water-use graphs estimated from changes in tank level.
The right devices.
Working together.
Choose tank monitoring, then add compatible pump control where you need it.
Water Level SensorMeasure the tank
The tank sensor measures the stored-water level and connects to the Level Manager.
View product
Level ManagerBring readings to the app
The Level Manager reports tank readings through its supported GSM or Wi-Fi connection.
View product
Motor ControllerOperate the filling pump
A compatible, linked Pump Controller switches the filling motor through its starter.
View product
Solar PanelPower tank-side monitoring
The solar panel supplies the Level Manager. The Pump Controller uses its own AC supply.
View product
The tank sensor and Level Manager provide readings. Automatic pump operation also needs a compatible Pump Controller, correct tank settings and a tested starter connection.

Your site, in one
organised view.
Open a tank card to see its level, last reading and linked controller. Use the guide to follow setup and controls screen by screen.
- Give each tank a name that is easy to recognise.
- Check the last reading time and low/full notifications.
- Link the correct Pump Controller to the tank before testing Manual and Auto modes.
Available controls and reports depend on the installed hardware, connection and account plan. Usage reports are estimates from tank-level changes.
Start with the details
of your site.
Share these details so the WaterGauge team can confirm suitable devices, connection options and installation requirements for homes.
Get a site-specific quote- 01
Your tanks
Number of tanks, actual height and capacity.
- 02
Your pump
Pump/starter type and the location of the switch panel.
- 03
Your connection
Available GSM signal or supported 2.4 GHz Wi-Fi at the devices.
- 04
Your installation
Access to the tank and a sunny location for a solar-powered Level Manager.
Clarity before
you get started.
Answers for homes and the equipment that connects your tanks and pumps.
Talk to our teamCan I monitor a tank without automating the pump?
Yes. The sensor and Level Manager provide tank readings. Add a compatible Pump Controller when you also need to switch the filling motor.
Do I need both a Level Manager and a Pump Controller?
For tank readings, use the sensor and Level Manager. Pump switching requires a separately installed, compatible Pump Controller linked to that tank.
Which phones and connections are supported?
The WaterGauge app is available on Android and iOS. Device connectivity uses GSM or Wi-Fi on supported models; Wi-Fi setup uses a 2.4 GHz network. Confirm the connection option for your supplied hardware.
What information is needed for a quote?
Share your tank count and dimensions, pump/starter details, site location and available network. The team will confirm equipment and installation requirements for your setup.
Let’s plan your WaterGauge setup.
Tell us about your homes site. We’ll help you choose the next step.



