HERE TO HELP

A little clarity.
A smarter start.

From your first tank to everyday control, find answers to your WaterGauge questions in one place.

16 questions

Products & installationWhat is a wireless water level controller here?

On this site the level side is the sensor plus the solar level manager, which sends the reading to the Android app over the mobile network. The motor side is the controller at the starter. People use one search phrase for both. The wireless water level controller page separates them. The full set is wireless water automation.

Products & installationDoes the tank need a cable down to the pump?

Not for the level. The sensor cable goes to the level manager at the tank. The level then uses the mobile network. The controller still has wires to the motor starter. Wireless means that long roof-to-pump cable is not how the reading travels.

Products & installationHow is the level manager powered?

From its solar panel. The install notes say to place the panel in direct sun and to confirm power on a status LED or display. Wattage and battery backup hours are not published. See solar water level monitoring.

Products & installationDoes the motor controller use the same solar panel?

No. The controller page says it connects to an AC power source with the included adapter, in a dry place near the starter. Plan mains power in the pump room even when the roof unit is solar.

Mobile app & controlsWhich app do I install?

WaterGauge is available for Android on Google Play (package com.waterguage.water_guage) and for iPhone on the App Store. Use the download buttons on our home page to open the correct store. The app gives you tank readings, remote pump controls, alerts and schedules. Explore our mobile app guide for screen-by-screen help.

Mobile app & controlsCan I turn the motor on and off from the phone?

Yes, that is the controller test: pair the app, switch the motor by hand, and confirm the starter follows. Automatic control is tested as well. The home page also lists schedules and thresholds. Details of how many schedules you can save are not published.

Mobile app & controlsWill I get an alert when the tank is full or low?

The level manager steps say to verify that the app notifies you when certain levels are reached. The exact wording of those alerts and the list of set-points are not printed on the site. Test them once during installation, which is already part of those steps.

Products & installationIs the sensor meant to be under water?

The sensor page says it is waterproof, built for immersion, and maintenance-free, and that it measures level in a tank or reservoir. Mount it clear of obstructions, using the supplied hardware. A rating for sewage or chemicals is not published. Ask if your water is not a normal storage tank.

ConnectivityDoes it need mobile network at the tank?

Yes for the level path that is written down. The level manager has a SIM already fitted, and the site should be inside cellular coverage. Sun without signal is not enough. The page does not name a mobile operator.

Mobile app & controlsCan one app watch more than one tank?

The home page says you can monitor multiple devices. It does not publish a maximum. If you have two tanks, say so when you ask for an estimate. Do not assume one sensor covers two tanks. That arrangement is not described.

Products & installationWill this stop a tank from overflowing?

Overflow control, as described, needs the level and the motor switch. You see the level, you can be notified, and the controller can turn the filling motor off. A shutoff time in seconds is not published. Read how overflow is handled before you treat it as a certified safety device.

Products & installationCan it automate a borewell motor?

The controller page talks about a submersible motor starter and a relay connection, or the starter maker's own method if it is not that type. A borewell motor is often submersible, so compatibility still has to be checked. The sensor described is in the tank or reservoir, not a depth probe down the bore. See borewell automation and farms.

Pricing & supportWhat is the price in India?

No price is published. Cost depends on monitoring only versus also switching the motor, the number of tanks, and the starter. The price guide explains those factors without a rupee figure. Use the free estimate form or call +91 70004 65454.

Pricing & supportWhere are you, and which cities do you serve?

The published office is 1st Floor, above PNB, near Pipliyahana Road, Scheme No 140, Indore, Madhya Pradesh 452016. Email is support@watergauge.in. Other cities are not listed. City pages will be added only for places Water Gauge actually serves. Hours are not published.

Products & installationHow does water tank automation work?

A sensor measures the water level in the tank. The Level Manager sends readings to the WaterGauge app through its supported connection. A separate, compatible Pump Controller near the starter lets you turn the filling pump on or off. Auto operation also needs the correct tank settings and a tested controller connection. The app is available for Android and iPhone.

Pricing & supportWho makes Water Gauge?

The home page news text names Synetal Solutions Pvt Ltd and Manoj Malviya as CEO. That is the maker identified on the site. It is not a customer testimonial. Support is still the Indore phone and support@watergauge.in. The contact page collects those details in one place, and how it works is the device order if you want the story without the questions.

LET’S TALK

Still have a question?

Tell us about your tank, pump or installation. We’ll help you find your next step.

Contact Us
Call us WhatsApp